How to re-host a iC9200 Controller license
| Version Number | Description |
|---|---|
| 1.0 | Initial version, explains how to license an iCube Controller with various features. |
|
|
|
1. Supported Components
| Component Name | Version |
|---|---|
| iC9200 series | ≥ 2022.0.1 |
| iCube Engineer | ≥ 2022.6.0 |
2. Solution details
2.a Re-host iCube Controller license
- Open a internet browser or tab and navigate to https://icubecontrol.com/licensing.html and follow the link for "Activate a Controller Feature License" . Enter the ticket number into the "Ticket" input and click the "Next" button.
- On the new page, scroll all the way down and click the "Re-host Licenses" button.
- Open a different internet browser or tab and login to the Controller's “WBM” at "http://<controller-ip-address" Leave the previous web page open in a separate browser/tab for later.
- Open the "License Management" page from the side navigation panel under "Administration". All licensed features can be seen in this page.
- Go back to the “CodeMeter” page/tab and search for the container license that you would like to re-host.
- Select the Re-hostable license
- On the next page an error will occur.
- Scroll down to the bottom of the page and select File-based license transfer
- Go back to the “WBM” for the controller and in the License management section select the “Offline Activation” tab.
- Select the "Basic file format" for the offline activation wizard
- Select the “Next” button and then download the “.WibuCmRaC” file.
- Back in the “CodeMeter” page scroll down to the “Choose File” button and upload the “.WibuCMRaC” file that was downloaded from the Controller.
- Select the “Upload Request And Continue Now” button. This may take a few seconds.
- Select the “Download License Update File Now” button to download the “WibuCmRaU” file.
- In the Controller “WBM” select next and then upload the “.WibuCMRaU” file.
- After the file is uploaded select the next button.
- Download the Receipt file “.WibuCmRaR”
- Go back to the “CodeMeter” page and select “Next”
- Select the “Choose File” button to select the “WibuCmRaR” file and then upload the file using the “Upload Receipt Now” button.
- License Transfer Successfully Completed
- Go into the controller “WBM” and select “Finish”
- Go to “View Containers” tab to verify that the license is not in the container.
- Power cycle the controller to verify the license removal.
