Y_SelectTool

This function block activates a tool to be used in the kinematic and dynamic transform equations for a mechanism / group motion.

Note: This Function Block is NOT supported for Locally hosted Group

Parameters

*	Parameter	Data Type	Description	Default
VAR_IN_OUT
B	AxesGroup	AXES_GROUP_REF	A logical reference to a group of axes, which contains several additional substructures pertaining to the group.
V	ToolStruct	Yt_ToolStruct	Structure containing information about a groups tooling, such as offset, center of gravity, and mass.
VAR_INPUT
B	Execute	BOOL	Upon the rising edge, all other function block inputs are read and the function is initiated. To modify an input, change the value and re-trigger the execute input.	FALSE
V	ToolNumber	INT	ToolNumber to be activated.	INT#0
VAR_OUTPUT
B	Done	BOOL	Set high when the commanded action has completed successfully. If another block takes control before the action is completed, the Done output will not be set. This output is reset when Execute goes low.
E	Busy	BOOL	Set high upon the rising edge of the Execute input, and reset when Done, CommandAborted, or Error is true. In the case of a function block with an Enable input, a Busy output indicates the function is operating, but not ready to provide Valid information. (No Error)
E	CommandAborted	BOOL	Set high if motion is aborted by another motion command or MC_Stop. This output is cleared with the same behavior as the Done output.
B	Error	BOOL	Set high if an error has occurred during the execution of the function block. This output is cleared when 'Execute' or 'Enable' goes low.
E	ErrorID	UINT	If Error is true, this output provides the Error ID. This output is reset when 'Execute' or 'Enable' goes low.