Y_GroupWriteParameter
This function block will write a parameter to the AxesGroup specified. For a complete list of parameters that can be written using this function block, refer to parameters with LREAL Data Type in the Group Parameter List .
Parameters
| * |
Parameter | Data Type | Description | Default |
|---|---|---|---|---|
|
VAR_IN_OUT
|
||||
| B |
AxesGroup | AXES_GROUP_REF | A logical reference to a group of axes, which contains several additional substructures pertaining to the group. | |
| VAR_INPUT | ||||
| B | Execute |
BOOL | Upon the rising edge, all other function block inputs are read and the function is initiated. To modify an input, change the value and re-trigger the execute input. | FALSE |
| B | ParameterNumber |
UINT | Group parameter number. Refer to parameters with LREAL Data Type in Group Parameter List. | UINT#0 |
| E | Value |
LREAL | Value of the parameter. | LREAL#0.0 |
| VAR_OUTPUT | ||||
| B | Done |
BOOL | Set high when the commanded action has completed successfully. If another block takes control before the action is completed, the Done output will not be set. This output is reset when Execute goes low. | |
| B |
Busy |
BOOL | Set high upon the rising edge of the Execute input, and reset when Done, CommandAborted, or Error is true. In the case of a function block with an Enable input, a Busy output indicates the function is operating, but not ready to provide Valid information. (No Error) | |
| B | Error | BOOL | Set high if an error has occurred during the execution of the function block. This output is cleared when 'Execute' or 'Enable' goes low. |
|
| E |
ErrorID | UINT | If Error is true, this output provides the Error ID. This output is reset when 'Execute' or 'Enable' goes low. |
|
Error Description
See the Function Block ErrorID List.