How to configure and use decentral PROFINET SLIO Slices with iC9200 serie
| Version Number | Description |
|---|---|
| 1.0 | Initial version |
|
|
1. Supported Components
| Component Name | Version |
|---|---|
| iC9210-PN | ≥ 2022.0.1 |
| iCube Engineer | ≥ 2022.9 |
| SLIO PROFINET coupler053-1PN01 | |
|
|
|
2. Solution details
This
How To Do
explains how to read the actual online decentral PROFINET SLIO Slices connected over SLIO coupler 053-1PN01.
Starting conditions:
- New iCube Project without PROFINET hardware configuration
- Connected SLIO 053-1PN01 PROFINET coupler with slices
- PLC in RUN mode / Status disconnected
Scanning for connected devices:
Import devices to the project:
Read SLICE Modules of PROFINET device:
Slices found on PROFINET SLIO Device:
Complete hardware
configuration inside Project tree:
